With the extension of filtration time, the dust layer on the filter bag continues to accumulate thick, and the resistance of the dust removal equipment continues to rise. When the resistance of the equipment rises to the set value, the dust removal device begins to clean the dust. The electrical control of the central dust removal system is the command center of the whole dust removal system,...

The dust extraction arm supplier may pulse dust removal according to an automatic control procedure at a specified time or resistance value. After the dust extraction arm supplier enters the single machine, the dust goes through two stages of filtration. The reduction of gas velocity and the change of air flow direction make the large particles of dust settle in the dust collection box due to...

The key effect of dust removal equipment in the purchase vacuum fume extractor air bag is to store enough air compression, to determine the smooth working pressure of the gas path, together with sewage treatment effect. A good method is to press the air bag of the dust removal equipment in 1 side of both sides of the monopulse bag type dust collector. If the air bag is installed in the front...

suspended suction arm was a suction suction device well designed for the top and bottom of cement storehouse, belt conveying and local dust source. It is mainly composed of the box body (including bag chamber, clean air chamber, porous plate, filter bag, bag cage frame and access door. The box body design is not afraid of pressure of 5000pa.) , injection system (including air bag, injection...

The central dust collection system supplier shall prevent the gas from cooling below the dew point in the pouch room during use, especially when using the central dust collection system under negative pressure. If the far infrared electric heater or heater is installed in the dust collector, or the radiator is added in the bag room, the flue gas temperature of the main engine can be properly...

The structure of the cartridge type dust collector is composed of an air inlet pipe, an exhaust pipe, a box, an ash hopper, a cleaning device, a diversion device, an air flow distribution plate, a filter cartridge and an electric control device, similar to the air box pulse bag dust removal structure. . The arrangement of the polyester filter cartridge in the dust collector is very important....

When using the mobile fume extraction unit, pay attention to the ambient temperature so that the material of construction can be correctly determined. For acidic or alkaline gases, the air duct of the mobile fume extraction unit needs to be treated with anti-corrosion. In humid air environment, the mobile fume extraction unit needs to be strengthened with anti-rust treatment or made of...

What are the precautions for the environmental conditions when using purchase welding fume collector. 1. Pay attention to the ambient temperature in order to correctly determine the material of construction. Acidic or alkaline gas requires anti-corrosion treatment on the purchase welding fume collector air duct. In humid air environment, the purchase welding fume collector needs to be...

The mobile fume extraction unit uses a thick steel plate, which is fixed with the gas cylinder and is generally used to grind the ball structure. According to the different diameters and necessary proportions, the barrels are added, and the cutting material will most likely be steel. So how to carry out the maintenance of mobile fume extraction unit? 1. If the outside air is injected...