The key effect of dust removal equipment in the purchase vacuum fume extractor air bag is to store enough air compression, to determine the smooth working pressure of the gas path, together with sewage treatment effect. A good method is to press the air bag of the dust removal equipment in 1 side of both sides of the monopulse bag type dust collector. If the air bag is installed in the front end of the clean brake air chamber of the bag dust collector, the dust collector filter bag can not be installed in the indoor space of the bag chamber matching the bottom of the air bag of the dust removal equipment, which wastes the indoor space of the bag chamber; The gas is packed on one side of both sides of the bag dust collector. Because the gas is packed on both sides of the bag chamber, the indoor space of the bag chamber can be flexibly used, the same total area of over-anxious steel consumption is reduced, and the elbow part of the blowpipe of the spray boiler is exposed to the outside of the clean brake chamber, so the engineering construction and installation is more convenient. Therefore, as far as possible, people should choose the side way to install the air bag.

When using pulsed bag dust collector equipment, special attention should be paid to the following problems, in order to improve the running rate of equipment, reduce the failure rate, and properly extend the service life of pulsed bag dust collector.

1. Regular oiling and maintenance of the dust collector: In order to improve the service life of the pulse-type cloth bag dust collector, the equipment should be regularly oiling and maintenance, and the air bag fixed to the oil-water separator and dust collector should remove oil, water and other impurities twice. In addition, in order to prevent dust spontaneous combustion explosion caused by dust accumulation, the pulse-type cloth bag dust collector should be cleaned regularly to keep the filter bag clean and unblocked, to maintain the appearance of the dust collector and properly extend the service life of the equipment.

2, regular maintenance equipment: pulse type cloth bag dust collector has many parts, including the shell, clean air room, distribution box ash hopper, filter bag, electromagnetic pulse valve, etc. Each part plays an important role. In order to make the pulse bag dust collector have the ideal operation effect, it is necessary to make sure that the components are intact and trouble-free. Therefore, it is necessary to overhaul the equipment frequently, check whether there is any major component damage or failure of the pulse type bag dust collector, and timely maintenance treatment. A technician should be contacted to repair the dust collector. Do not disassemble the parts easily during maintenance, otherwise it is easy to damage the internal structure of the vacuum cleaner, leading to more and more failures.

purchase vacuum fume extractor https://www.kaisenfilter.com/KSG-5-5-A-High-Vacuum-Fume-Extractor.html