The power sockets used by the full-performance comprehensive tester of the One Switch Two Pin Socket Mould and the product under test should be intact and fixed sockets. Do not use sockets that do not meet the specifications. Damaged sockets should be replaced in time. The One Switch Two Pin Socket Mould used by the comprehensive safety performance tester and the product under test should be a fixed socket in good condition. Do not use sockets that do not meet the specifications. Damaged sockets should be replaced in time. During the test, it is strictly forbidden for the operator's body, the live parts of the instrument and the load shell to be tested, and beware of electric shock. Start the tester: Press the power switch on the panel, and the tester starts up immediately. After a delay of seconds, the self-test interface will be displayed.

Self-inspection: After confirming that the device to be inspected is not connected to the junction box, press the confirm button, and the instrument self-inspects. The self-test is correct, and the main menu is automatically entered. After selecting the test, set up several test groups according to the products of different specifications and models, in the main menu, press the OK key, first set the password, and then press the up or down key at the beginning of each row to select insulation, grounding, For test items such as withstand voltage, leakage, and startup, set the test conditions, alarm values, and test time of each item according to the test requirements, and use the left and right movement keys to set the increased or decreased parameter values.

One Switch Two Pin Socket Mould https://www.tangrammould.com/One-Switch-Two-Pin-Socket-Mould.html